Email this article An FPGA Implementation Of Real-Time Finger-Vein Recognition System For Security Levels
Abstract
In this project, we propose a real-time embedded finger-vein recognition system (FVRS) for authentication on mobile devices. The system is implemented on an embedded platform and equipped with a novel finger-vein recognition algorithm. The proposed system consists of four hardware modules: radio frequency identification system, image acquisition module, embedded main board, and human machine communication module. RFID module will start the very initial communication between the user and the device The image acquisition module is used to collect finger-vein images. The Spartan 3AN FPGA is used to execute the finger-vein recognition algorithm and communicate with the peripheral device. The human machine communication module (LED or keyboard) is used to display recognition results and receive inputs from users.
References
S. Pankanti, R. M. Bolle and A. Jain, “Biometrics: TheFuture of Identification,” IEEE Computer, Vol.33, No.2,Feb. 2000, pp. 46-49.
P. J. Phillips, A. Martin C. L. Wilson and M. Przybocki,“An Introduction to Evaluating Biometric Systems,” IEEEComputer, Vol.33, No.2, Feb. 2000, pp. 56-63.
D. Wang , J. Li, and G. Memik, “User identification based on fingerveinpatterns for consumer electronics devices”, IEEE Transactions onConsumer Electronics, vol. 56, no. 2, pp. 799-804, 2010
D. D. Hwang and I. Verbauwhede, “Design of portable biometricauthenticators - energy, performance, and security tradeoffs,” IEEETransactions on Consumer Electronics, vol. 50, no. 4, pp. 1222-1231,Nov.2004.
N. Miura, A. Nagasaka, and T. Miyatake, “Feature extraction of fingerveinpatterns based on repeated line tracking and its application topersonal identification”, Machine Vision Application, vol. 15, no.4,pp.194–203, 2004.
W. Song, T. Kim, H. C. Kim, J. H. Choi, H. Kong and S. Lee, “A finger-vein verification system using mean curvature”, PatternRecognition Letters, vol. 32, no.11, pp. 1541-1547, 2011.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.