Web Based Fault Detection System

Abstract

Embedded systems became an important part of our life. Addressing functional safety is a major challenge with increasing complexity. Typical examples of safety-critical embedded systems include vehicle safety or driver assistance systems with accident prevention. This specification applies to a system allowing to remotely monitoring appearance of faults on a device network so that to localize faulty sections and send patrols for reconfiguration of the network accordingly. The system shall be made of Fault detection systems with wireless communication to be installed on the networks, as specified in this document. A piece of software in the control centre is used to display the fault information from these Fault passage indicators. This shall be referred to as Fault Monitoring software. The Control Centre shall continuously measure the parameters of the devices connected wirelessly over the network. A suitable wireless interface shall facilitate acquiring this information to allow reading it remotely at the control centre.