Email this article Condition Examine And Flaw Determination In Induction Motor- An Exploration
Abstract
Induction motor notably three phase induction motor plays dynamic role in the industry due to their advantages over other electrical motors. Therefore, there is an extreme demand for their intense and secure operation. If any fault and failures occur in the motor it can lead to uncontrolled downtimes and generate prominent losses in terms of revenue and maintenance. Therefore, premature fault detection is needed for the indemnity of the motor. In the current scheme, the condition examine of the induction motor are increasing due to its potential to diminish operating costs, enhance the intense of operation and enhance service to the customers. The condition examine of induction motor is an emerging technology for online determination of incipient flaws. The on-line condition examine involves taking measurements on a machine while it is in operating conditions in order to determination of flaws with the aim of diminishing both unexpected flaws and maintenance costs. In the present paper, a comprehensive contemplate of induction machine flaws, diagnostic mechanism and future aspects in the condition examine of induction motor has been discussed.
Keywords
References
B. Yazici and G.B. Kliman, “An Adaptive Statistical Time- Frequency Method for Detection of Broken Bars and Bearing Faults in Motors
Using Stator Current”, IEEE Trans. on Ind. Appl, Vol. 35, No. 2, pp. 442-452 ,Mar./Apr. 1999.
.W. T. Thomson and M. Fenger, "Current Signature Analysis to Detect Induction Motor Faults” IEEE. Ind. Appl. Mag, Aug. 2001.
Cha-Cho Yeh, Gennadi Y. sizov, Ahmed Sayed-Ahmed, Nabeel A. O. Demerdash, Richard J. Ponivelli, Edwin E. YAz and Dam M. Ionel, "A Reconfigurable Motor for Experimental Emulation of Stator Winding Interturn and Broken Bar Fault in Polyphase Induction Machines", IEEE Transaction on Energy Conversion, Vol. 23, Dec. 2008.
W. Saadaui and K. Jelassi, “Induction Motor Bearing Damage Detection Using Stator Current Analysis”, Proc. Int. Conf. on PowerEngineering, Energy and Electrical Drives,2011.
L. Frosini and E. Bassi, “Stator Current and Motor Efficiency as Indicators for Different Types of Bearing Faults in Induction Motor”, IEEETransactions on Industrial Electronics, Vol. 57, No. 1,2010.
Sergio M. A. Cruz and A. J. Marques Cardoso, “Multiple Reference Frames Theory: A New Method for the Diagnosis of Stator Faults in Three-Phase Induction Motors”, IEEE Transactions on Energy conversions, Vol. 20, No. 3, Sept. 2005.
Riera-Guasp, M., Antonino-Daviu, J., Pineda-Sanchez, M., Puche-Panadero, R and PerezCruz, J, “A General Approach for the Transient Detection of Slip-Dependent Fault Components Based on the Discrete Wavelet Transform", IEEE Transactions on Industrial Electronics, Vol. 55, No.12, pp. 4167-4180, 2008.
Gabe Paoletti and Alex Golubev,“Partial Discharge Theory and Applications to Electrical Systems”, IEEE IAS Pulp and Paper IndustryConference in Seattle, 1999.
John S.Hsu, “Monitoring of Defects in Induction Motors through Air-Gap Torque Observation”, IEEE Transactions on Industry Applications,
Vol. 31, No, 5, pp. 1016-1021,1995.
A.J. Ellison and S.J. Yang, “Effects of Rotor Eccentricity on Acoustic Noise from Induction Machines”, Proc. of IEE, 118,(1)”, pp 174-184,1971.
Sa’ad Ahmed Saleh Al Kazzaza, G.K. Singh, “Experimental Investigations on Induction Machine Condition Monitoring and Fault Diagnosisusing Digital Signal Processing Techniques”, Electric Power Systems Research 65, 197/221,2003.
Juggrapong Treetrong, “Fault Detection of Electric Motors Based on Frequency and Time-Frequency Analysis using Extended DFT”,International Journal of Control and Automation, Vol. 4 No. 1, March ,2011.
Ece,D.G. and Gerek, O.N., “ Induction Motor Fault Diagnosis Via Current Analysis on Time Domain”, Proc, 17th IEEE Int. Conf., SignalProcessing and Communications Applications, pp. 488-491, 2009.
Chua, TW,Tan,W.W.,Wang,Z.X. and Chang, C.S., “ Hybrid Time-Frequency Domain Analysis for Inverter-Fed Induction Motor FaultDetection, Proc. IEEE Int. Conf.Industrial electronics (ISIE), Jan. 2011.
Khalaf Salloum Gaeid and Wooi Ping "Wavelet Fault Diagnosis And Tolerant of Induction Motor: A Review”, International Journal ofPhysical Sciences, Vol. 6(3), pp. 358-376, Feb. 2011.
Z. Ye, B. Wu, and A. Sadeghian, “Current Signature Analysis of Induction Motor Mechanical Faults by Wavelet Packet Decomposition”,IEEE Trans. Industrial Electronics, Vol.50, No. 6, Dec. 2003.
H. Douglas, P. Pillay, and A. K. Ziarani, “A New Algorithm for Transient Motor Current Signature Analysis Using Wavelets”, IEEETransactions on Industry Applications, Vol. 40, No. 5, Sept/Oct. 2004
Pons-Llinares, J, Antonino-Daviu, J, RogerFolch, J., Morinigo-Sotelo, D. and Duque-Perez, O, “Eccentricity Diagnosis in Inverter FedInduction Motors via the Analytic Wavelet Transform of Transient Currents”, XIX International Conference on Electrical Machines (ICEM),pp. 1 -6, 2010.
R. Salehi Arashloo and A. Jalilian, “Design, Implementation and Comparison of Two Wavelet Based Methods for the Detection of BrokenRotor Bars in Three Phase Induction Motors”, 1st Power Electronic & Drive Systems & Technologies Conference, PEDSTC, pp. 345 -35,2010.
Turkmenoglu, M. A, “Wavelet-Based Switching Faults Detection”, IET Science, Measurement and Technology, Vol. 4, No. 6, pp. 303-31,2010.
A.J.M. Cardoso and E.S. Saraiva, “Predicting the Level of Air Gap Eccentricity in Operating Three-Phase Induction Motors, by Park’s Vector Approach”, IEEE Ind. Appl. Society Annual Meeting, Vol. 1,pp. 132-135,1992.
S.M.A. Cruz and A.J.M. Cardoso, “Stator Winding Fault Diagnosis in Three-Phase Synchronous and Asynchronous Motors, by the Extended Park’s Vector Approach”, IEEE Trans.on Ind. Appl, Vol. 37, No. 5, pp. 1227-1233, Sep/Oct. 2001.
F. Filippetti, G. Franceschini, G. Gentile, S. Meo, A. Ometto, N. Rotondale and C. Tassoni, “Current Pattern Analysis to Detect Induction Machine Non-Rotational Anomalies”, Int.Conf. on Elect. Machines, Vol. 1, pp. 448-453,1998.
F. Filippetti and M. Martelli, “Development of Expert System Knowledge Base to On- Line Diagnosis of Rotor Electrical Faults of InductionMotors”, IEEE Ind. Appl. Society Annual Meeting,Vol. 1, pp. 92-99,1992.
R. Fiser and S. Ferkolj, “Application of Finite Element Method to Predict Damaged Induction Motor Performance”, IEEE Trans.on Magnetics,Vol.37, No. 5, pp. 3635-3639, Sept. 2001.[25]C.J.C. Burges, “A Tutorial on Support Vector Machines for Pattern Recognition”, Data Mining and Knowledge Discovery, Vol.2, No. 2,1998.
M.Y. Chow, “Methodologies of Using Neural Network and Fuzzy Logic Technologies for Motor Incipient Fault Detection”, World Scientific,Singapore, 1997.
F. Filippetti, C. Tassoni, G. Franceschini and P. Vas, “Integrated Condition Monitoring and Diagnosis of Electrical Machines Using MinimumConfiguration Artificial Intelligence”, European Power Electronics Conf, pp. 2983-2988,1997.
E. Styvaktakis, M.H.J. Bollen and I.Y.H. Gu, “Expert System for Classification and Analysis of Power System Events”, IEEE Trans. onPower Delivery, Vol. 17, No. 2, pp. 423-428, Apr. 2002.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.