Email this article Reduction of Torque Ripple in Direct Torque Control of Induction Machines by Use of all Voltage Vectors of Matrix Converters
Abstract
This paper proposes the use of all voltage vectors of matrix converters to reduce the electromagnetic torque ripple which is one of the most important drawbacks of direct torque control for induction motors using matrix converters. The standard look up table for direct torque control by matrix converters is improved in order to include the small, medium and large voltage vectors of matrix converters. With the new look-up table and new hysteresis comparator with seven levels of output the system will differentiate between small, medium and large torque errors and consequently reduce the electromagnetic torque ripple and output current THD. The simulation results demonstrate the effectiveness of this novel control strategy.
Keywords
References
D. Casadei, F. Profumo, G. Serra, A. Tani, “FOC and DTC: Two Viable Schemes for Induction Motors Torque Control,” IEEE Trans. On Industrial Electronics, vol. 17, no. 5, pp.779-787, Sep. 2002.
P. W. Wheeler, J. Rodriguez, J. C. Chars, L. Empringham, A. Weinstein, “Matrix converters: a technology review,” IEEE Trans. on Industrial Electronics, vol. 49, no. 2, pp. 276-288, Apr. 2002.
C. Ortega, A. Arias, J.L. Romeral, E. Aldabas, “Direct torque control for induction motors using matrix converters,” IEEE Compatibility in Power Electronics, pp. 53- 60, CPE 2005.
C. Klumpner, P. Nielsen, I. Boldea, F. Blaabjerg, “New solutions for a low-cost power electronic building block for matrix converters,” IEEE Trans. on Industrial Electronics, vol. 49, no. 2, pp. 336-342, Apr. 2002.
Der-Fa Chen, Chin-Wen Liao, Kai-Chao Yao, “Direct Torque Control for a Matrix Converter Based on Induction Motor Drive Systems,” IEEE Second International Conference on Innovative Computing, Information and Control, pp. 101-104, ICICIC 2007.
K.B. Lee, J.H. Song, I. Choy, J.Y. Yoo, “Torque Ripple Reduction in DTC of Induction Motor Driven by Three-Level Inverter With Low Switching Frequency,” IEEE Trans. on Power Electronics, vol. 17, no 2, pp 255-264, Mar. 2000.
D. Casadei, G. Serra, A. Tani, “The Use of Matrix Converters in Direct Torque Control of Induction Machines,” IEEE Trans. on Industrial Electronics, vol. 48, no. 6, pp. 1057-1064, Dec. 2001.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.