Email this article 3d Modeling and Detailing of Silumin Piston With Static Analysis
Abstract
Piston is the part of engine which converts heat and pressure energy liberated by fuel combustion into mechanical works. Engine piston is the most complex component among the automotives. Weight reduction has been gaining importance in automobile field because reducing in weight decreases load on the engine and thus increasing efficiency of the engine. As we all Know that Piston is made of Aluminum Alloy Such that its weight is less. The automobile industry has shown increased interest in replacing the Piston with the material having high strength to weight ratio.
Therefore the objective of this project is to present a general study on the performance comparison of composite Piston and Aluminum Alloy Piston. Dimensions and specifications used in modeling are collected from the actual Piston of Hero-Honda Splendor Bike. The Piston is modeling in solid Works.
References
Design and Analysis of Piston Design for 4 Stroke Hero Bike Engine by VinodYadavApplied Mechanics, MANIT Bhopal. Email: imvinodyadav@hotmail.com &Dr. N. D. Mittal Professor, Applied Mechanics,MANIT Bhopal - International Journal of Engineering Innovation & Research Volume 2, Issue 2, ISSN: 2277 – 5668.
Thermal Cyclic Fatigue Analysis of Three Aluminum Piston Alloys by WilfriedWunderlich&Morihito Hayashi of Tokai University, Faculty of Engineering, Department of Material Science, 259-1292 Hiratsuka, Kanagawa, Japan-International Journal of Material and Mechanical Engineering, 2012, 1: 57-60.
Piston Strength Analysis Using FEM by Swati S Chougule (Second Year M.E. CAD/CAM & Robotics, Department of Mechanical Engineering, PIIT, New Panvel, Mumbai University, Navi Mumbai,) &,Vinayak H Khatawate(Asst. Prof. Department of Mechanical Engineering, PIIT, New Panvel, Mumbai University, Navi Mumbai)- International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 www.ijera.com Vol. 3, Issue 2, March -April 2013, pp.1724-1731 1724.
Parametric And Material Optimization Of Two Wheeler Piston Using Aluminum Alloy 7475-761 And Aluminum Alloy 6061 by Soniakaushik,Rayapuri Ashok,Mohammed zubairnizami-Department of Mechanical Engineering Lords Institute of Engineering & Technology 1soniyakaushik@gmail.com-InternationalJournal of Advanced Trends in Computer Science and Engineering.
Piston Damages – Case Studies And Possibilitiesof Early Detection by Jan Filipczyk, ZbigniewStanikSilesian University of TechnologyFaculty of TransportKrasinskiego Street 8, 40-019 Katowice, Poland e-mail: jan.filipczyk@polsl.pl-Journal of KONES Powertrain and Transport.
Fatigue on engine pistons – A compendium of case studies by F.S.SilvaDepartment of Mechanical Engineering, University of Minho, Azure´m, 4800-058 Guimara˜ es, Portugal-WWW.Sciencedirect.Com.
Aluminum Silicon Carbide (Al-Sic) for Advanced Microelectronic Packages by Mark Occhionero, Richard Adams, Kevin Fennessy, and Robert A. HayCeramics Process Systems, Corp.Chartley, MA 02712.
Pistons and cylinders made of carbon-carboncomposite materialsUS 6044819 A by G. Burton Northam, Philip O. Ransone, H. Kevin Rivers, Francis A. Schwind.-The United States Of America As Represented By The Administrator Of The National Aeronautics And Space Administration.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.