Email this article A New Multilevel Inverter Topology of D-STATCOM to Compensate Reactive and Nonlinear Loads
Abstract
This work proposes an enhanced hybrid distribution static compensator (D-STATCOM) topology to address some practical issues like power loss, filter size, performance etc. A LCL filter has been utilized at the front end of a voltage source inverter (VSI), which gives better exchanging harmonics elimination while utilizing much littler estimation of an inductor as contrasted and the conventional L channel. A capacitor is utilized in as eries with LCL channel to diminish the dc-interface voltage of the D-STATCOM. This thusly lessens the power rating of the VSI. With lessened dc-connect voltage, the voltage over the shunt capacitor of the LCL filter will be additionally less. It will decrease the power misfortunes in the damping resistor as contrasted and the conventional LCL filter with latent damping. In this way, the proposed DSTATCOM topology will have decreased weight, cost, rating, and size with enhanced proficiency and current pay capacity contrasted and the conventional topology. A deliberate methodology to outline the segments of the inactive filter has been displayed. A multilevel cascaded-H-bridge is executed in the VSI operation of a D-STATCOM topology. The viability of the proposed DSTATCOM topology over customary topologies is approved through MATLAB/SIMULINK programming.
References
Chandan Kumar, Student Member, IEEE, and Mahesh K. Mishra,
Senior Member, IEEE” An Improved Hybrid DSTATCOM Topology to
Compensate Reactive and Nonlinear Loads” IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 61, NO. 12, DECEMBER 2014.
S. Ostroznik, P. Bajec, and P. Zajec, “A study of a hybrid filter,” IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 935–942, Mar.2010.
A. Ghosh and G. F. Ledwich, Power Quality Enhancement Using Custom Power Devices.. Norwell, MA, USA: Kluwer, 2002.
H. Hu, W. Shi, Y. Lu, and Y. Xing, “Design considerations for DSPcontrolled 400 Hz shunt active power filter in an aircraft power system,” IEEE Trans. Ind. Electron, vol. 59, no. 9, pp. 3624–3634, Sep. 2012.
B. Singh and S. Arya, “Back-propagation control algorithm for power quality improvement using DSTATCOM,” IEEE Trans. Ind. Electron., vol. 61, no. 3, pp. 1204–1212, Mar. 2014.
B. Singh and S. Arya, “Implementation of single-phase enhanced phase locked loop-based control algorithm for three-phase DSTATCOM,” IEEE Trans. Power Del., vol. 28, no. 3, pp. 1516–1524, Jul. 2013.
J. Liu, P. Zanchetta, M. Degano, and E. Lavopa, “Control design and implementation for high performance shunt active filters in aircraft power grids,” IEEE Trans. Ind. Electron., vol. 59, no. 9, pp. 3604–3613, Sep. 2012.
M. Singh, V. Khadkikar, A. Chandra, and R. Varma, “Grid interconnection of renewable energy sources at the distribution level with powerquality improvement features,” IEEE Trans. Power Del., vol. 26, no. 1, pp. 307–315, Jan. 2011.
A. Bhattacharya and C. Chakraborty, “A shunt active power filter with enhanced performance using ANN-based predictive and adaptive controllers,” IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 421–428, Feb. 2011.
R. Inzunza and H. Akagi, “A 6.6-kv Transformerless shunt hybrid active filter for installation on a power distribution system,” IEEE Trans. Power Electron., vol. 20, no. 4, pp. 893–900, Jul. 2005.
B. Singh and S. Sharma, “Design and implementation of four-leg voltage source- converter-based VFC for autonomous wind energy conversion system,” IEEE Trans. Ind. Electron., vol. 59, no. 12, pp. 4694–4703, Dec. 2012.
P. Kanjiya, V. Khadkikar, and H. Zeineldin, “A non iterative optimized algorithm for shunt active power filter under distorted and unbalanced supply voltages,” IEEE Trans. Ind. Electron., vol. 60, no. 12, pp. 5376–5390, Dec. 2013.
S. Rahmani, N. Mendalek, and K. Al-Haddad, “Experimental design ofa nonlinear control technique for three-phase shunt active power filter,”IEEE Trans. Ind. Electron., vol. 57, no. 10, pp. 3364–3375, Oct. 2010.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.