Email this article New Hybrid Active Filter Topology for Harmonic Resonance Suppression
Abstract
Accidental arrangement as well as parallel resonances, due to the tuned latent channel and the line inductance, may bring about extreme symphonious twisting in the mechanical power framework. This venture shows a half breed dynamic channel to stifle symphonious reverberation and to decrease consonant mutilation. The proposed crossover channel is worked as factor consonant conductance as indicated by the voltage add up to symphonious twisting; along these lines, consonant contortion can be decreased to a worthy level because of load change or parameter variety of the power framework by utilizing fluffy controller. Since the cross breed channel is made out of a seventh-tuned uninvolved channel and a dynamic channel in arrangement association, both dc voltage and kVA rating of the dynamic channel are drastically diminished contrasted and the immaculate shunt dynamic channel. In genuine application, this component is exceptionally appealing since the dynamic power channel with completely control hardware is extremely costly. A sensible tradeoff between separating exhibitions and cost is to utilize the cross breed dynamic channel. Moreover, this venture talks about separating exhibitions on line impedance, line resistance, voltage unbalance, and capacitive channels. The outcomes confirmed through MATLAB/SIMULINK condition.
References
Tzung-Lin Lee, Member, IEEE, Yen-Ching Wang, Student Member, “Hybrid Active Filter With Variable Conductance for Harmonic Resonance Suppression in Industrial Power Systems” IEEE, Jian-Cheng Li, and Josep M. Guerrero, Senior Member, IEEE
R . H. Simpson, “Misapplication o f power capacitors in distribute tion systems with nonlinear loads-three case histories,” I E E E Tra n s . I n d . A p p l ., vol. 41, no. 1, pp. 134–143, Jan./Feb.2005.
T. Di ionize and V. Lorch, “Voltage distortion on an electrical distribution system,” IEEE In d . A p p l . M ag., vol. 16, no. 2, pp. 48–55, Mar./Apr. 2010.
E. J. Currence, J. E. Plizga, and H. N. Nelson, “Harmonic resonance at a medium-sized industrial plant,” IEEE Tra n s . I n d . A p p l ., vol. 31, no. 4, pp. 682–690, Jul/Aug. 1995.
B. Singh, K. Al-Haddad, and A. Chandra, “A review of active filters for power quality improvement,” IEEE Trans. Ind. Electron., vol. 46, no. 5, pp. 960–971, Oct. 1999.
H. Akagi, “Active harmonic filters,” Proc. IEEE, vol. 93, no. 12, pp. 2128– 2141, Dec. 2005.
A. Bhattacharya, C. Chakraborty, and S. Bhattacharya, “Shunt compensation,” IEEE Ind. Electron. Mag., vol. 3, no. 3, pp. 38–49, Sep. 2009.
F. Z. Peng, “Application issues of active power filters,” IEEE Ind. Appl. Mag., vol. 4, no. 5, pp. 21–30, Sep./Oct. 2001.
S. Bhattacharya and D. Divan, “Design and implementation of a hybrid series active filter system,” in Proc. 26th IEEE PESC, 1995, pp. 189–195.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.