Email this article Multi-Level Inverter with Facts Capability for Reliable Power Distributions Using Wind Energy as Source
Abstract
The paper manages the multilevel converters control procedure for photovoltaic framework coordinated in dispersion matrices. The proposed control plan guarantees the infusion of the produced power in the conveyance network with quick element reaction, while giving an extra dynamic force sifting ability giving the required consonant and responsive streams to be considered. The control plan is accepted by method for reenactments with a course converter which interfaces to a dispersion network. Additionally, for DC join voltage control, it is required that balances out the voltage at the inverter data to protect a ceaseless stream of vitality trade between the matrix and the PV framework. Likewise, a LC channel is important to channel the yield current and voltage from the sounds and to shield the network from their ruinous impact. At long last, this paper presents nitty gritty demonstrating of the framework joined photovoltaic era framework parts, in Simulink/Mat lab programming. Recreation results displayed to approve the parts models and the picked control plans. The outline and correlation of multi-level inverter with D-STATCOM for wind vitality frameworks utilizing Modular Multi-level Converter (MMC). The point of the work is to outline diverse levels of inverter with FACTS gadgets to give utilities more learning about the appropriation frameworks, particularly toward the end focuses. Henceforth made the correlation between these levels of inverters where the yield of the framework does not change with the levels of inverter but rather the Total Harmonic Distortion (THD) of the framework will lessens as the level increments. This inverter is put between the wind turbine and the conveyance network where the dynamic and responsive force is direct which is required by the lattice. Recreations of the proposed inverter with 11 level and 17 level have been done in MATLAB/Simulink. The reenactment results accept the execution of the proposed control system.
Keywords
References
Kuo-Ching Tseng and Chi-Chih Hung “High step-up High-Efficiency Interleaved Converter With Voltage Multiplier Module for Renewable energy system”, IEEE Trans. Ind.Electron., vol. 61, no. 3, pp. 0278–0046, March. 2014.
Y. P. Hsieh, J. F. Chen, T. J. Liang, and L. S. Yang, “Novel high step-up DC–DC converter for distributed generation system,” IEEE Trans. Ind.Electron., vol. 60, no. 4, pp. 1473–1482, Apr. 2013.
Y. Zhao, X. Xiang, W. Li, X. He, and C. Xia, “Advanced symmetrical voltage quadrupler rectifiers for high step-up and high output-voltage converters,” IEEE Trans. Power Electron., vol. 28, no. 4, pp. 1622–1631, Apr. 2013
A. Beekmann, J. Marques, E. Quitmann, and S. Wachtel, “Wind energy converters with FACTS capabilities for optimized integration of wind power into transmission and distribution systems,” inProc. CIGRE/IEEE PES Joint Symp. Integr. Wide, Scale Renew. Resour. Power Del. Syst. , Jul. 2009, pp. 1–9.
J. Rodriguez, J. S. Lai, and F. Z. Peng, “Multilevel inverters: Survey of topologies, controls, and applications,” IEEE Trans. Ind. Appl. , vol. 49, no. 4, pp. 724–738, Aug. 2002.
F. Z. Peng, J. S. Lai, J. W. McKeever, and J. VanCoevering, “A mul-tilevel voltage-source inverter with separate DC sources for static Var generation,” IEEE Trans. Ind. Appl. , vol. 32, no. 5, pp. 1130–1138, Oct. 1996.
L. M. Tolbert and F. Z. Peng, “Multilevel converters as a utility interface for renewable energy systems,” in Proc. IEEE Power Eng. Soc. Summer Meeting, vol. 2. Jul. 2000, pp. 1271–1274.
S. Kouro, M. Malinowski, K. Gopakumar, J. Pou, L. G. Franquelo, B. Wu, et al., “Recent advances and industrial applications of multilevel converters,” IEEE Trans. Ind. Electron. , vol. 57, no. 8, pp. 2553–2580, Aug. 2010.
C. Tareila, P. Sotoodeh, and R. D. Miller, “Design and control of a single-phase D-STATCOM inverter for wind application,” in Proc. PEMWA, Jul. 2012, pp. 1–5.
B. Gultekin and M. Ermis, “Cascaded multilevel converter-based trans-mission STATCOM: System design methodology and development of a 12 kV ± 12 MVAr power stage,” IEEE Trans. Power Electron. , vol. 28, no. 11, pp. 4930–4950, Nov. 2013. Renewable energy grid integration.
Refbacks
- There are currently no refbacks.
Copyright © 2013, All rights reserved.| ijseat.com
International Journal of Science Engineering and Advance Technology is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJSEat , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.